Advert For Tender Opportunity: Provision Of Filtration Services at PAN Ocean Oil Corporation, Nigeria

PAN Ocean Oil Corporation

Operator of the NNPC/PAN Ocean Joint Venture

Advert For Tender Opportunity: Provision Of Filtration Services

1.     Introduction

Pan Ocean Oil Corporation Nigeria, Operator of NNPC/Pan Ocean Joint Venture in OML-98, located onshore in Edo and Delta states, requires the services of competent and qualified contractor with suitable equipment and relevant experience for the provision of Filtration Services.

2.     Scope of Work

• Contractor shall supply complete Filtration Equipment (Dual Port Cartridge Filter Unit) capable of filtering brine to 10 NTU or less at a minimum rate of 15 bpm processing rate.
• Contractor shall provide the following ancillary equipment to support Filtration operations. Centrifugal Pumps, Turbidometer, Slurry Mix tanks with associated discharge and suction hoses. Support equipment should have the capacity to handle High Temperature and Pressure flow conditions of 250 – 300 deg F and 5000 psi to 10,000 psi respectively
• Contractor shall have capacity of providing adequate consumables (Filtration Cartridges, Diatomaceous Earth (DE), etc) at all times.
• Contractor shall have minimum of two dedicated Equipment ready for mobilization for filtration services at all time.
• Contractor shall have workshop/warehouse for servicing/repairing of Filtration Equipment and storage of adequate consumables for filtration services on minimum of two wells at all times.
• Contractor shall also have adequate personnel with adequate experience/capacity to operate Filtration Equipment and services and should be able to fix minor problems of equipment at all times.

3.     Well Test Flow Conditions

The wells in the OML 98 are mainly straight and deviated trajectories with deviation angles ranging from 0-48 degrees. Composition of Brine during Completion Operations is mainly Potassium Chloride (Kcl) & Calcium Chloride (Cacl₂) and sometimes with some Calcium Bromate (CaBr₂) with Brine Weights ranging from 8.5 ppg to 15 ppg. The nature of Hydrocarbon from the OML includes Oil, condensate and gas with gravity API from 10-55 degrees. The FTHP wells ranges from 100 -6000 psi. The crude is generally sweet (i.e. No H₂S or CO₂ challenge) but however prone to hydrate formation during flow tests.

4.       Mandatory Requirements

A.      To be eligible for this tender exercise, interested bidders are required to be prequalified in any of the following: Drilling Machinery, Mud Equipment and Accessories 1.01.01; Drilling/Completion Engineering Services 3.01.08 and Drilling Fluids/Mud Services 3.04.15 categories in the NipeX Joint Qualification System (NJQS) database. All successfully pre-qualified suppliers in this NJQS category by the advert close date will receive Invitation to Technical Tender (ITT) for this service

B.      To determine if you are prequalified and view the product/service category you are listed for: visit www.nipexng.com and access NJQS with your log-in details, click on continue Joint Qualification Scheme tool, click check my supplier status and then click supplier product group

C.      If you are not listed in this product/service category and you are registered with DPR to do business, contact NipeX office at 30 Oyinkan Abayomi Street, Ikoyi, Lagos with your DPR certificate as evidence for verification and necessary update

D.      To initiate the JQS pre-qualification process, access www.nipexng.com to download an application form, make necessary payments, and contact the NipeX office for further action

E.      To be eligible, all tenders must comply with the Nigerian Content requirements in the NipeX system

Nigerian Content Development Strategy

In consonance with Nigerian Oil & Gas Industry Content Development Act, Pan Ocean Corporation Nigeria is committed to providing opportunities for indigenous Nigerian capacity development and utilization. In pursuant of the aforementioned, the prospective bidders must therefore, comply with the following criteria:

• Demonstrate that the entity is a wholly owned Nigerian company, or in genuine partnership with foreign companies, and that the company is not a commissioned agent.
• Provide a verifiable local involvement plan through employment and sub-contracting plan for Nigerians.
• Provide details on location of Project Management Team and Procurement Centre in Nigeria.
• Provide information on training of Nigerian employee and company plan for technology transfer.
• Submit an organizational structure to substantiate the information and address of location.
• Provide information of in-country facilities.
• Explain further innovative proposals that would enhance and sustain Nigerian Content on this project.
• Provide what other information, innovation or plans you have that will increase Nigerian content development in the contract.
• The successful contractor will be adjudged on its commitment to comply with the NIGERIAN LOCAL CONTENT requirements within optimal and practical use of Nigerian resources on the project.
• Demonstrate evidence of having obtained Nigerian Content Equipment Certification (NCEC) from NCDMB for all the equipments to be deployed in the execution of the contract.

1. 5.     Close Date

Only Tenderers who are registered with Drilling Machinery, Mud Equipment and Accessories 1.01.01; Drilling/Completion Engineering Services 3.01.08 and Drilling Fluids/Mud Services 3.04.15   as at April 26, 2013 being the advert close date shall be invited to submit Technical Bids.

1. 6.     Additional Information

A. Interested contractors must be prequalified for this product/service category in NJQS

B. Full tendering procedure will be provided only to contractors that have been successfully prequalified in NJQS

C. This advertisement shall neither be construed as an Invitation to Tender (ITT) nor a commitment on the part of Pan Ocean to award a contract to any supplier and/or associated companies, subcontractors or agents

D. This advertisement shall not entitle prequalified companies to make any claims whatsoever, and/or seek any indemnity from Pan Ocean and/or its partners by virtue of such companies having been prequalified in NJQS

E. All costs incurred in registering and prequalifying for this and other product/service categories in NJQS shall be borne solely by suppliers

F.  Suppliers that are prequalified for this product/service category in NJQS must ensure that the name and contact details (physical address, email address and telephone number) of their company and authorized/responsible personnel is up-to-date in their company profile in the NJQS database

G. Pan Ocean shall communicate only with the authorized/responsible personnel of prequalified companies and not through unauthorized individuals or agents.

• Please visit the NipeX Portal at www.nipexng.com for this Advert and other information.

Management

Share on Facebook