Star Deep Water Petroleum Limited
(A Chevron Company)
Operator of the Agbami Unit (OML 127/128)
Tender Opportunity Provision of Design Engineering Support Services for Agbami FPSO
Introduction
Star Deep Water Petroleum Limited invites interested and prequalified companies to this tender opportunity for Design Engineering Support Services to support activities on Agbami FPSO (Floating, Production, Storage and Offloading) Vessel, The contract shall be a call out contract, proposed to span 2 (two) years with an option of 1 (one)year extension.
Scope of Work
The Scope of this Contract shall include but is not limited to the Provision of the following services:
Project Management Services Scope:
Project Management Services under this Scope of work is to cover all Engineering Design Works for Conceptual, FEED and Detailed Engineering Design Phases of a Project.
a. Management and coordination of all aspects of engineering activities for facility developments.
b. Provision of dedicated and suitable Engineering Manager Representative to provide coordination with Company.
c. Development of local design engineering capability.
d. Preparing Verification of Conceptual, FEED and Detailed Engineering scopes of work, estimates and schedules for facilities developments
e. Management of accounting, cost, schedule and quality
f. Information Technology
g. Document Preparation and Management
h. Material Management
i. Coordinating Safety activities throughout execution.
j. Assisting Company in its application of the Star Deep Project Development and Execution Process and other Company processes and tools.
Engineering Services Scope:
Engineering, Design, and Drafting Services to support development of the Star Deep Water Petroleum Limited facilities shall include the following disciplines:
a. Process Engineering
b. Instrumentation /Process Automation System Control
c. Mechanical/ Rotating Equipment
d. Piping
e. Onshore & Offshore pipelines
f. Electrical Engineering
g. Civil Engineering
h. Structural Engineering
i. Architectural Engineering
In addition, services may be required to support the following activities:
- Process Studies and Reports
- Specification Preparation and Review
- Equipment Certification Report for third party approval
- Material Expediting
- Inspection of materials and equipment, and witnessing of tests
- Coordination of engineering in the form of limited design and engineering support during fabrication and construction activities
- Fabrication Support
- Construction Support
- Material Control
- Computer Aided Design (Drafting)
- Healing, Ventilating & Air Conditioning (HVAC)
Contractor will demonstrate capacity and capability to provide the following services:
- Architectural design, Mechanical Design, Structural Engineering, Piping Design, Electrical Engineering, Project Management, Hazardous Area Classification, Instrumentation and Control, Technical Documentation. Telecoms, Process Engineering, Cost Estimating, Drafting Services (3-D Intelligent P&IDs, PDMS, Isometrics and General Arrangement Drawings)
Specialist Engineering Services Scope:
The following scope of work will be expected to be subcontracted to recognized experts in this fields
- HAZOP Chairmanship.
- Specialist Process Engineering Studies (i.e. Hare radiation modeling and gas release modeling)
- Reliability Modeling
- Maintenance Consulting
- Development and Review of Procedures
- Marine Structure Dynamic Analysis including Fatigue Analysis
- Dynamic Flow Modeling and
- Finite Element Analysis.
Mandatory Tender Requirements
A. To be eligible for this tender exercise, interested contractors are required to be pre-qualified in 3.01.01 (Project Administration Services). 3.01.02 (Steel/Construction/Architectural Services). 3.01.03 (Process /Utilities/ Piping/HVAC Services). 3.01.04 (Equipment/Mechanical Services) or 3.01.99 (Other Engineering Services) categories in NIPEX Joint Qualification System (NJQS) database. All successfully pre-qualified suppliers in this category by the bid close date will receive Invitation to Technical Tender (ITT).
B. Please note that interested bidders including their sub-contractor(s) shall be required to:
i. Meet all JQS mandatory requirements to be listed as “Prequalified” for a category in the JQS database.
ii. Meet all Nigerian Content requirements stated in this advert in their responses to the Imitation to Technical Tender.
C. To determine if you are pre-qualified and view the product/service category you are listed for: Open www.nipexng.com and access NJQS with your log in details, click on continue Joint Qualification Scheme tool, click cheek my supplier status and then click supplier product group.
D. If you are not listed in this product/ service category, and you are registered with DPR to do business for this category, please contact NipeX office at 30, Oyinkan Abayomi drive, Ikoyi Lagos with your DPR certificate as evidence for verification and necessary update.
E. To initiate and complete the JQS prequalification process, access www.nipexng.com to download the application form, make necessary payments and contact NipeX office for further action.
Nigerian Content
Star Deep Water Petroleum Limited is committed to the development of the Nigerian Oil and Gas business in observance with the Nigerian Oil and Gas Industry Content Development Act 2010 (NOGICD Act) enacted by the Federal Government of Nigeria in April 2010.
Pursuant to enactment of the NOGICD Act, the minimum Nigerian Content in any project, service or product specification to be executed in the Nigerian Oil and Gas Industry shall be consistent with the level set in the schedule of the Act and any other target as may be directed by the Nigerian Content Development and Monitoring Board (NCDMB).
Contractors shall comply with the provisions of the NOGICD Act and all applicable regulations. Bidders that do not meet the Nigerian Content criterion will not be allowed to participate in next fender Stage
The following are the Nigerian Content requirements bidders are expected to comply with in their technical bid submission.
A. Demonstrate that the entity is a Nigerian Registered Company, or a Nigerian Registered Company in genuine alliance or joint venture with foreign company with details on scope and responsibilities of parties for this work. Such companies must show evidence of joint venture binding agreement duly signed by the CEO of both companies including evidence or plans of physical operational presence and set-up in Nigeria.
B. Furnish details of company ownership and share holding structure. Also submit clear photocopies of your CAC Forms CO2 and CO7
C. Provide evidence of the percentage of 1) key management positions that are held by Nigerians and 2) total work force that are Nigerians. Also, show overall percentage of work to be performed by Nigerian resources relative to total work volume.
D. Provide a Nigerian Content Plan with a detailed description of the role, work scope, man-hours and responsibilities of all Nigerian companies and personnel that will be involved in executing the work. Also provide details of Nigerian Content contact or manager.
E. State proposed total scope of work to be performed by Nigerian personnel (whether contracted directly or under subcontract agreements) with names and addresses including evidences of well equipped offices and workshop; attach past experience of such patronage.
F. Specific to this project, provide detailed plan for staff training and development on engineering, project management and procurement (including all software to be used, number of personnel, name of organization providing such training and evidence of past training record) for Nigerian personnel including description of any specific programs in place for transfer of technology and skills to indigenous businesses and Nigerians over the next five (5) years.
G. Provide evidence of domiciliation of project management and procurement centers in Nigeria with physical addresses (not P.O. Box).
H. Location of in-country facilities. (Equipment, storage, workshops, repair & maintenance facilities and, testing facilities).
I. Contractor must be willing and able to provide evidence of maximization of made in Nigeria goods and services.
J. Provide details on any other Nigerian Content initiative your company is involved in.
K Provide evidence of MOU with OGTAN registered trainer to conduct classroom module of training and on the job attachment.
L. Provide human capacity building development plan including budget which must be minimum 10% of project man-hours or cost. Training will be targeted at developing capacity other than bidder’s personnel. Trainees will be nominated from a database maintained by NCDMB and the services of OGTAN registered trainers utilized to cover classroom modules.
M. Provide details of equipment ownership.
N. Bidders (Vendors, Original Equipment, Manufacturers-OEMs, and EPC Contractors) are required to present Nigerian Content Equipment Certificate (NCEC) issued by Nigerian Content Development and Monitoring Board (or evidence of application for the certificate) in respect of any components, spares, equipments, systems and packages to be used in the proposed project under tender
Close Date
Only bidders who are registered with NJQS Product/Category 3.01.99 (other Engineering Services) by 4:00 pm. on 20th June, 2013 being the advert close date shall be invited to submit technical bid.
Please note the following:
1. Suppliers eligible for this tender opportunity are expected to be prequalified in NJQS under this product /service category.
2. The Invitation to Tender (ITT) and any further progression of this tender shall be via NipeX.
3. All costs incurred in preparing and processing NJQS prequalification shall be to the contractor’s accounts.
4. This advertisement shall neither be construed as any form of commitment on the part of Star Deep Water Petroleum Limited to award any contract to any company and or associated companies. Sub-contractors or agents, nor shall it entitle prequalified companies to make any claims whatsoever. and or seek any indemnity from Star Deep Water Petroleum Limited and or any of its partners by virtue of such companies having been prequalified in NJQS.
5. The tendering process shall be the NNPC contracting process requiring pre-qualified companies to submit technical tenders first. Following a technical review, only technically and financially qualified contractors will be requested to submit commercial tenders.
6. Star Deep Water Petroleum Limited will communicate only with authorized officers of the pre-qualifying companies and NOT through individuals or Agents.
Please visit NipeX portal at www.nipexng.com for this advert and other information.
Star Deep Water (a Chevron Corporation affiliate) is the operator of the Agbami Field. Other Participants are Famfa Oil Limited Nigerian National Petroleum Corporation (NNPC), Texaco Nigeria Outer Shelf Inc. (a Chevron Corporation affiliate), Statoil Nigeria Limited, and Petroleo Brasileiro Nigeria Limited,
2 Chevron Drive Lekki Peninsula, P.M.B. 12825, Lagos
