Nigerian Agip Oil Company Limited
On behalf of NNPC/POCNL/NAOC J.V Operation
Tender Opportunity for the Charter and Operation of 1No Line Handling Vessel
Introduction
Nigerian Agip Oil Company Limited (NAOC) intends to award a contract for the charter and operation of one Line Handling Vessel.
The work location shall be Nigeria Agip Oil Company (Nigeria) Limited Swamp and Deep Offshore locations,
The proposed contract shall have duration of five (5) years effective from the date of supply and acceptance
2. Scope Of Work
The scope of work shall be the charter and operation of one Line Handling Vessel for offshore operations, mooring the oil tankers at SBN buoy.
Intending bidders are to note that only vessels built within the years listed in the technical specification below are acceptable.
The technical specifications of the vessel include but not limited to the following:
Registered Name: Yes
Year Built: 2000-2010
Length Overall: 40meters Max
Maximum Breadth: 10-12 Meters
Moulded Depth: 4 Meters
Ligh Draft: 2.5 Meters
Maximum Draft: 3.5 Meters
Deck Space: Sufficient for Mooring activities & lines stowage
Main Engine: 3,200BHP Minimum
Propellers: Twin Variable Pitch/Schottel/Azimuth propeller
Bow Thrusters: 400 BHP Minimum
Deck Crane: 10Tons
Working Winches Double Drum 657 with 48mm
/Variable Size Wire rope (AH Drum 1x600x48mm)
Tugger Winch: Double Drum 20T with 18mm Wire rope
(Tow Drum 2x600x48mm)
PERFORMANCE
Cruising Speed: 12Knots
Economic Speed: 10Knots
Bollard Pull 40-50 Tons Minimum
CAPACITIES
Diesel Oil Tanks: 200m3
Fresh Water Tanks: 100m3
Dispersant tanks: 5m3
Rec Oil Foam: 40/50m3
Dispersant spray booms: 5.0Meters
Fire Monitors: Yes (FiFi 1) FFQ1 2 Monitors of 200m3/hr each
Mandatory Requirements
a) To be eligible for this tender exercise, interested Contractors are required to be pre-qualified in the 3.06.13- Mooring System Services: 3.08.01-Tugs/ROV Support/Diving Support Vessels and 3.08.17- Support Vessels (product /Services) in NipeX joint Qualification System (NJQS) database. All successfully pre-qualified suppliers in this category will receive Invitation to technical Tender (ITT).
b) To determine if you are pre-qualified and view the product/service category you are listed for: Open www.nipexng.com and access NJQS with your log in details, click on continue Joint Qualification Scheme tool, click check my supplier status and then click supplier product group
c) If you are not listed in product/service category but you are registered with DPR to do business, contact NipeX office at 30, Oyinkan Abayomi Street, Ikoyi Lagos with your DPR certificate as evidence for necessary update.
d) To initiate the JQS pre-qualification process, access www.nipexng.com to download application form, make necessary payments and contact Nipex office for further action.
Nigerian Content:
To qualify, tenders must comply with the provisions of the Nigerian Oil and gas industry Content Development ACT, 2010 and CABORTAGE Act and with other requirements in Nipex system.
4. Closing Date
Only tenderers who are registered with NJQS under Product Group 3.06.13 – Mooring System Services; 3.08.01 – Tugs/ROV Support/Diving Support Vessels and 3.08,17 – Supply Vessels as on 29th March 2011, being the advert closing date, shall be invited to submit Technical Bids.
5. Additional Information
This advertisement of Tender Opportunity” shall not be construed as a commitment on part of NAOC, nor shaft it entitle. Applicants to make any claims whatsoever and/or seek arty indemnity from NAOC and/or any of its Partners by virtue of such Applicants having responded to this Advert.
Please visit the NipeX Portal at www.nipexng.com for this Advert and other information.
MANAGEMENT
