Provision Of Rig Support Services in OML-123 at Addax Petroleum Development (Nigeria) Limited

Addax Petroleum Development (Nigeria) Limited  (RC No. 333615)

Advert for Tender Opportunity Provision Of Rig Support Services in OML-123

Introduction:

Addax Petroleum Development (Nigeria) Limited (hereinafter referred to as “APD(N)L”) invites interested and pre-qualified Contractors to respond to this tender opportunity for the provision of the following services as detailed in item 2 below, at APD(N)L’s OML-123 [Offshore] facilities. The contracts are proposed to commence in Q1, 2013 and continue for a duration of two (2) years with APD(N )L having the sole option to extend the duration for a further period of one (1) year.

Scope of Services Requirements:

As a minimum requirement, the selected Contractor shall have the necessary experience, capability and shall be fully responsible for the provision of Equipment and Services suitable for use in an offshore operation as listed in the table below;

1)         Addax Tender No. TB-3012 – Casing & Tubular Running Services NJQS Category- Casing/Tubing Running Services (3.04.05) Contractor must be able to provide Casing & Tubular Running Equipment and Services including but not limited to the following:

• Casing & Tubular running equipment for OD sizes of 20, 13-\!”,  11-^3/₄“, 9-<! ,” 9-]!”, 7-]!”, 7″,4-¹/₂-3- ¹/₂, ^Λ !”  and 2-∖!”;
• Tubular running services;
• Bucking services and pressure testing of bucked sub-assemblies;
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily  perform the above services

2)         Addax Tender No. TB-301 3 – Fishing Services

NJQS Category- Fishing/Wireline Fishing Services (3.04.12)

Contractor must be able to provide Fishing Tools and Services including but not limited to the following:

• Single trip whipstock system for casing sizes 7″, 7 ]!”, 9 J!”, 13 \!” and 20″ of light and heavy wall thickness;
• Various types and sizes of mills (starting, window, watermelon, string, section, junk and tapered mills) dressed with tungsten carbide particles;
• Fishing tools for various drilling tool operations (fishing jars, accelerators, intensifies, bumper subs, overshots, overshots extension, reverse circulating junk baskets, control/packer grapple, string and ditch magnets, taps, washover pipes, abandonment tools etc, for drilling, logging and testing operations;
• All necessary consumables and spare parts; and
• All  other, related equipment, tools  and experienced personnel necessary to satisfactorily perform the above services.

3)         Addax Tender  No- TB- 3014 – Drilling Tools Rental Services

NJQS Category -Other Drilling Services (3.04.99)

Contractor must be able to provide Drilling Tools/Equipment Rentals Services including but not limited to the following:

• Drilling tools (various sizes of drilling jars, subs, hole openers, under-reamers, accelerators, drill collar, heavy weight drill pipes, drill pipes, pup joints, cross-over, bit subs, non-magnetic drill collar etc);
• BOP related equipment 5K, 10K and 15K rated (various sizes of Ranges, double studded adaptors, riser spools, BOP flanges, BOP rams & other accessories, IBOP valves, Kelly valves, side entry subs, safety clamps, stabbing guide, mud basket etc);
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services

4)         Addax Tender No. TB-3015 – Drilling, Completion Fluids & Mud Engineering Services NJQS Category- Drilling Fluids/Mud Services (3.04.15)

Contractor must be able to provide Drilling/Completion Fluids/Chemicals and Engineering Services including but not limited to the following:

• Mud design, formulation and engineering;
• Materials/chemicals and engineering for water based and synthetic based drilling fluids;
• Materials/chemicals and engineering services for reservoir drill-in fluids;
• Materials/chemicals and engineering services for well completion fluids;
• Base oil;
• Liquid and bulk storage facilities;
• All drilling/completion fluids and chemicals must be approved my DPR.
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

5)         Addax Tender No. TB-3016- Surface Testing Services

NJQS Category-Well Testing Services (3.04.16)

Contractor must be able to provide Surface Testing Equipment & Services including but not limited to the following;

• Surface testing equipment and personnel required to handle fiowback of well effluent during Well Testing and cleanup operations on offshore floating drilling facilities. The SOW covers the equipment needed from the rotary table through to the burner booms. The equipment proposal must be able to fulfill the following requirements
• Safe flow, containment and control of well effluent during all phases of the operation
• Safe disposal of well effluent according to regulatory environmental requirements
• Measurement and sampling of well effluent during flow-back operations
• Measurement and recording of all flow parameters
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

6)         Addax Tender No. TB-3019 – Cement and Cementing Services

NJQS Category – Cementing Services (3.04.04)

Contractor must be able to provide Cement & Cementing Services including but not limited to the following:

• Offshore skid-mounted diesel driven cement unit, equipped with muffler and spark arrestors, 10,000 psi rated with twin pumps c/w dual stage 8 bbl/min re-circulating Mixer, automatic density control system and digital data acquisition package for pump rate, pressure, fluid density, cumulative volume, fluid density etc
• Cement design, formulation, laboratory testing and engineering;
• Cement,  cement chemicals and additives; onshore bulk plant for cement delivery
• Cementing equipment accessories such as float collar, float shoe, stage collars, centralizers, stop collars, wiper plugs, subsea release plug systems and associated surface cementing head.
• Squeeze packer, testing/ treatment packers, bridge plugs, cement retainers, storm packers/ valves etc;
• Pumping and pressure testing services, including low pressure gauge manifold;
• All necessary consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

7)         Addax Tender No. TB-3022 – Solid Control Services

NJQS Category-Drilling Fluids/Mud Services(3.04.15)

Contractor must be able to provide Solids Control Equipment & Services including but not limited to but not limited to the following:

• Solid Control equipment (high and variable speed centrifuge, cuttings Drier/mud recovery system, complete auger system and mono pumps/ diaphragm pump, mud vac, high pressure steam cleaner etc;
• Specifically for Offshore: Cuttings storage tanks on board rig, cutting transport system including lines and pump to transfer drill cuttings from Jack-up rig to cutting containments (skips) on the supply vessel. Provision of trolleys and aid facilities on the transport vessels to support cuttings transfer.
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services

8)         Addax Tender No. TB-3025 – Downhole Testing Services
NJQS Category – Drill Stem Testing Services (3.04.30)

Contractor must be able to provide Downhole Testing Equipment & Services including but not limited to the following;

• Drill Stem Test (DST) (various sizes of retrievable and permanent downhole testing packers, locators and seal assemblies, safety valves, testing and circulating valves, gauge earners, bottom hole sampler carriers, rupture disk and tubing fill valves, surface test tree manual valves, hydraulic actuator, swivel, check valve, emergency shutdown system, high accuracy and high resolution gauges, surface readout equipment etc).
• Tubing Conveyed Perforation (TCP) (various sizes/charges/shot per foot tubing conveyed perforation RDX & HMX guns, gun spacer, automatic gun drop sub, mechanic firing head, mechanic and automatic tubing release, automatic time-delay firing head, pressure vent etc.
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

9)         Addax Tender No. TB-3026 – Coil Tubing and Nitrogen Services

NJQS Category ~ Coiled Tubing Services (3.04.37)

Contractor must be able to provide Coiled Tubing Unit. Equipment & Nitrogen Lift Services including but not limited to the following;

• Coiled Tubing Unit – coil tubing control cabin with impact resistant windows and contains all necessary controls, communication and calibrated monitoring facilities to ensure a safe and efficient operation;
• Coil Tubing Lift Frame as per API 8C with power supply and accessories
• Crossovers to Pressure Control Equipment and tubular
• Long Bails,
• Coiled tubing reel capable of operating with pipe diameters between ¹/₄ and 2∖!” (inclusive) with a drum capacity of up to 15,000ft x 10,000 psi;
• Coiled tubing injector head, Stuffing Box / Dual Stripper. Dual Shear Seal BOP
• Power Pack for power supply; ‘
• Coiled tubing tools such as; Straight bar, Connector, Emergency disconnect, Check valves Jetting nozzles, Fishing equipment and connectors for well intervention tools, jars, motors, impact hammers, accelerators
• Data acquisition unit;
• Pumping unit;
• Nitrogen and Nitrogen quads;
• Flow back storage tanks;
• Toolbox with fishing tools and equipment for all coil tubing tools specified,
• Nitrogen converter capable of delivering nitrogen at 3505sct/min at a pump output pressure of 3000psi etc); and will include: Inlet and exhaust flame traps, over-speed shutdown, High exhaust or wafer temperature shutdown, Anti-static equipment and Inertia or air starter motors.
• All necessary consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

10) Addax Tender No. TB-3027 – Gyro Services

NJQS Category – Cased Hole Logging Services (Gyro, Perforation, PLT, Gauges) (3.04.29)

Contractor must be able to provide Gyro Tools/Equipment and Services including but not limited to the following;

• Battery operated memory single-shot / multi-shots North Seeking Gyro services deployable by Drop, wireline or slickline
• Single-shot / multi-shots surface readout North Seeking Gyro
• Multi-axis Gyro sensor multi-shots continuous North Seeking Gyro
• North Seeking Gyroscopic probe operational in MWD collar of various major directional drilling contractors
• GR/CCL subs to run in some applications with North Seeking Gyro tools
• Mono cable or multi-conductor wireline unit and accessories
• Gyro While Drilling (GWD) Tools;
• Wireline pressure control equipment
• All necessary consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

11) Addax Tender No. TB-3031 – Route Survey, Rig Move & Positioning Services NJQS Category- Diving /ROV Operations (3.07.07)

Contractor must be able to provide Rig Move and Positioning Equipment & Services including but not limited to following:

• Onshore equipment for rig move (Complete long range 700 km differential GPS shore station emitting on 2 HF frequencies located in suitable location near Qua Ibo and Lagos in Nigeria and other neighboring countries etc);
• Offshore equipment for route survey (Quality Integrated Navigation System to collect bathymetry and side scan sonar data, process data or Starfix system or equivalent navigation software integrated to DGPS system with DGPS correction sources accuracy within +0.3m in x, y, z axis, Navigation Software package with the ability to transform project files between Datum/Projections in Nigeria Mid-Belt & UTM zone 32N grid with minimum three decimal values etc);
• Offshore equipment for rig positioning (Quality Integrated Navigation System (QINSY) to
• collect bathymetry, side scan sonar data, sector scan sonar data, process data or Starfix system or equivalent navigation software integrated to DGPS system with DGPS correction sources accuracy within +0.3m in x. y, z axis. Navigation Software package with the ability to transform project files between Datum/Projections in Nigeria Mid-Belt & UTM zone 32N grid with minimum three decimal values);
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

12.       Addax Tender No. TB-3033- Conductor Piling  Services

NJQS Category- Conducting piling Services (3.04.03)

Contractor must be able to provide conductor Piling Equipment  and Services including  but  not  limited to the  following

• D-90 Hammer  and S-150 hammer (or equivalent) complete with emergency shut-off line, cradle, lifting/hammer hanging  slings, shackles with minimum safety factor of 2.0. Equipment to have capability to drive 36”, 30”, 26” and 20” conductors;
• Conductor piling equipment and services
• All necessary consumables and spare parts; and
• All other  related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

13.       Addax  Tender No. TB-3034- Completion Services -Cased Hole

NJQS Category – Well Completion Services (3.04.21)

Contractor must be able to provide Cased Hole Completion Equipment & Services including but not limited to the following;

• Cased hole upper completion for horizontal wells (3-¹/₂” 9.3# EUE, 4-1/2″ 12.6# Vam top tubing retrievable subsurface safety valve flapper type, c/w self-equalizing feature, permanent lock open feature, and 2.81″ nipple adapter w/B profile c/w jam nut type connection for  ¹/₄ control line, tubing mounted nipples, flow couplings, gas lift mandrels, gas lift valves, gas lift orifice valve, adjustable swivel sub, sliding sleeve door, tubing fill test vaive, tubing mounted retrievable production packers, hydraulic/electric line set retrievable production packers, locators, seals units and self-indexing guide shoe etc).
• Bucking services and pressure testing of bucked sub-assemblies.
• Calibration and setting/loading of gas lift valves.
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

14)      Addax Tender No. TB-3035 – Completion Services – Stand Alone Screen

NJQS Category – Well Completion Services (3.04.21)

Contractor must be able to provide Stand Alone Screen & Services including but not limited to the following;

• Various sizes of standard and high premium Stand Alone Screen (SAS) w/varying gauges or mesh sizes with BTC threads
• Various sizes of controlled delayed swell packers in synthetic oil based mud (Oil and water swellable) with BTC threads.
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

15)       Addax Tender No. TB-3036-Liner Hanger Services

NJQS Category- Liner Float, Hangers & Running Equipment Services (3.04.19)

Contractor must be able to provide Liner Hanger Equipment & Services including but not limited

• Liner hanger equipment (hydraulically set rotating & non-rotating liner hanger, tie back equipment, setting plugs, wiper ball, etc) for various casing sizes and weights.
• Liner top packers for various casing sizes and weights.
• Tie-back seal assemblies / packers for various casing sizes and weights.
• Liner hanger running tools and services
• All necessary Consumables and spare parts; and ,
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

16)      Addax Tender No. TB-3037 – Gravel Packing Services

NJQS Category – Gravel Packing (3.04.33)

Contractor must be able to provide Gravel Pack, Frac Pac, Single Trip Perf Pac Equipment and Services including but not limited to the following;

• Pumping Equipment (pumping unit, flowlines, valves, hoses, acid mixer, add return tanks, etc);
• Packing Materials (chemicals, proppant, etc);
• Downhole Tools to perform standard Gravel Packing.
• Complete Downhole Tools to perform Frac Packing in various hole sizes;
• Downhole Tools including DST tools, TCP tools and Guns to perform a Single Trip Perf Packing System in various hole sizes;
• Selective Horizontal Open Hole Gravel Packing with Inflow Control devices on the screens.
• Various sizes of premium wire wrap sand screen in various mesh sizes and design profiles suitable for each of the packing methods listed above;
• Filtration of packing fluid;
• All necessary Consumables and spare parts;
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

17)      Addax Tender No. TB-3038 – Completion Services – Expandable Sand Screen NJQS Category- Well Completion Services (3.04.21)

Contractor must be able to provide Expandable Sand Screens & Services including but not limited to the following;

• Various sizes of Expandable Sand Screen (ESS) w/varying gauge or mesh sizes
• Various sizes Expandable blank pipes
• Appropriate hangers and packers for various casing sizes.
• All necessary Consumables and spare parts; and
• All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.

C.        Mandatory Requirements

3.1.      To be eligible for any of the tender exercise, interested contractors are require to be prequalified in the Product/Services category (as mentioned against each tender under item B “Scope of Work/Service Requirements” above) in NipeX Joint Qualification System (NJQS) database. All successfully pre-qualified suppliers in this category will receive Invitation to Tender (ITT).

3.2.      To determine if you are pre-qualified and view the product/services category you are listed for: Open www.nipexng.com and access NJQS with your log in details, click on ‘continue Joint Qualification Scheme tool, click on ‘check my supplier status and thereafter click on supplier product group’.

3.3.      If you are not listed in a product/service category that you are registered with DPR to do business, contact NipeX office at 30, Oyinkan Abayomi Street, Ikoyi, Lagos with your DPR certificate as evidence for verification and necessary update.

3.4.      To initiate the JQS Pre-qualification process, access www.nipexng.com to download the requisite application form, make necessary payments and contact NipeX office for further action.

3.5.      To be eligible, all tenderers shall be required to comply with the Nigerian Content requirements in the NipeX system.

D.        Nigerian Content Requirements:

Tenderers are to note that they will be requested during the technical tender to provide details of their relevant strategy to ensure that they fully company with the Nigerian Oil & Gas Industry Content Act, 2010 as provided at www.nigcontent.com in view of the fact that non-compliance will constitute a fatal flaw in all contract evaluations.

In light of the above, Tenderers shall be expected by the Nigerian Content Development Monitoring Board (NCDMB) to:

• Demonstrate that the entity proposed for execution of the service, is a Nigerian Registered Company, or Nigerian Registered Company as the contracting entity in genuine alliance or joint venture with foreign company with details on scope and responsibilities of parties for this work. Such companies must show evidence of joint venture binding agreement duly signed by the CEO of both companies including evidence or plans of physical operational presence and set-up in Nigeria.
• Furnish details of company ownership and share holding structure. With photocopies of its CAC Forms CO2 and CO7.
• Provide evidence of what percentage of its key management positions are held by Nigerians and what percentage of the total work force are Nigerians. And also show overall percentage of work to be performed by Nigerian resources relative to total work volume.
• Provide a Nigerian Content Plan with detailed description of the role, work scope, man-hours and responsibilities of all the Nigerian companies and personnel that will be involved in executing the work.
• State proposed total scope of work to be conducted by Nigerian personnel (whether contracted directly or under subcontract agreements) with names and addresses including evidences of well equipped offices and workshop.
• Provide detailed plan for staff training and development on engineering, project management and procurement (including all software to be used, number of personnel, name of organization providing such training and evidence of past training record) for Nigerian personnel including description of any specific programs in place for transfer of technology and skills to indigenous businesses and Nigerians over the next five (5) years.
• Provide evidence of domiciliation of project management and procurement centers in Nigeria with physical addresses (not P.O. Box).
• Provide detailed description of the location of in-country facilities (Equipment, storage, workshops, repair, maintenance and testing facilities)
• Provide detailed statement with evidence of how it intends to maximize the use of Nigerian made goods and services.
• Provide details on any other Nigerian Content initiative the company is involved in.
• Provide MOA with Oil & Gas trainers association (OGTAN) registered facility for both class room type (theoretical) and on-the-job training attachment for the duration of the project.
• Provide evidence of minimum 50% equity ownership of equipment by Nigerian subsidiary.

E.     Closing Date

Only tenderers who are registered with the required NJQS Product/Category (as mentioned against each tender under item B “Scope of Work/Service Requirements” above) as at 12.00 noon on May 22^nd , 2012 being the advert closing date shall be invited to submit Technical Bids.

General Conditions

• Please note that all interested Contractors are required to strictly adhere to following conditions in relation to their response to this Advert:
• As stated in item 3 hereto. Contractors are required to be pre-qualified in NJQS under this specific Services category to be eligible to participate in this tender opportunity.
• All costs incurred in preparing and processing NJQS pre-qualification and responding to this Tender Opportunity shall be to the Contractor’s own account.
• This Advert shall neither be construed as any form of commitment on the part of APD(N)L to award any contract to any Contractor and or associated contractors, sub-contractors or agents, nor shall it entitle pre-qualified Contractors to make any claims whatsoever, and/or seek any indemnity from APD(N)L and/or any of its partners by virtue of such Contractors having been pre-qualified in NJQS.
• The tendering process shall be undertaken in accordance with the NNPC contracting process which requires pre-qualified Contractors to submit their documentation in the following manner:-

(i)   Pre-Qualified contractors in the relevant Product/Services category in NJQS will be requested to submit their Technical Tenders,

(ii) Following the Technical evaluation process, only technically acceptable and financially qualified contractors will be requested to submit their  commercial

• APD(N)L will  communicate only with authorized officers of the qualifying  contractors at each stage of the Tender process, as necessary, and will not  communication through individuals or appointed Agents.

Please visit the NipeX portal at www.nipexng.com for this Advert and other  relevant information.

Share on Facebook