Addax Petroleum Development (Nigeria) Limited (RC N0. 333615)
Tender Opportunity Provision of Waste Management Services in OML124
1. Introduction:
Addax Petroleum Development (Nigeria) Limited (hereinafter referred to as “APD(N)L”) invites interested and pre-qualified Contractors to respond to this tender opportunity for the provision of the following services as detailed in item 2 below at APD(N)L’s OML124 (Onshore) facility. The contracts are proposed to commence in Q1, 2012 and continue for a duration of two (2) years with APD(N)L having the sole option to extend the duration for a further period of one (1) year.
2. Scope of Services Requirements:
As a minimum requirement, the selected Contractor shall have the necessary experience, capability and shall be full responsible for the provision of Waste Management Services suitable for use in an onshore operation
TB-2936 Waste Management Services:
- Contractor must be able to provide Handling Equipment Transportation, Treatment and Stabilization for Drilling Waste Management Services including but not limited to the following:
- Equipment to handle drill waste (cuttings, contaminated soil and all drilling fluid wastes) at the rig location;
- Sealed/Leaked proof containment for safe drill waste;
- Safe transportation of drill waste to Contractor’s treatment site;
- Remediation and clean up of drill site after rig release;
- Treatment of Synthetic Based Mud (SBM) and Water Based Mud (WBM) drill cuttings, contaminated soil & liquids;
- Recover of drill fluid after treatment of waste with Thermal De-sorption Unit (TDU):
- Approved waste disposal site for treated SBM cuttings and liquids.
- All necessary consumables and spare parts; and
- All other related equipment, tools and experienced personnel necessary to satisfactorily perform the above services.
3. Mandatory Requirements:
3.1 To be eligible for this tender exercise, interested contractors are required to be pre-qualified in the Waste Management Services (3.15.07) (Product/Services) category in NipeX Joint Qualification System (NJQS) database. All successfully pre-qualified suppliers in this category will receive Invitation to Tender (ITT).
3.1.1 To determine if you are pro-qualified and view the product/services category you are listed for: You may visit NipeX NJQS
Website at www.nipexng.com and access NJQS with your log in details, click on ‘continue Joint Qualification Scheme tool, click on ‘check my supplier status and thereafter click on supplier product group’.
3.1.2 If you are not listed in a product/service category that you are registered with at DPR to do business, you may contact
NipeX’ office at 30, Oyinkan Abayomi Street, Ikoyi, Lagos, with your DPR certificate as evidence for necessary update.
3.1.3 To initiate the JQS Pre-qualification process, you may access www.nipexng.com to download the requisite application form, make necessary payments and contact NipeX office for further action.
3.2. In addition to 3.1 above, Tenderers shall also be required to comply with the Nigerian Content requirements in the NipeX system.
4. Nigerian Content Requirements:
Tenderers are to note that they will be requested during the technical tender to provide details of their relevant strategy to ensure that they fully company with the Nigerian Oil & Gas Industry Content Act, 2010 as provided at www.nnpcgroup.com and www.nigcontent.com, in view of the fact that non-compliance will constitute a fatal flaw in all contract evaluations.
In light of the above, Tenderers shall be expected by the Nigerian Content Development Monitoring Board (NCDMB) to:
- Demonstrate that the entity proposed for execution of the service, is a Nigerian Registered Company, or Nigerian Registered Company as the contracting entity in genuine alliance or joint venture with foreign company with details on scope and responsibilities of parties for this work. Such companies must show evidence of joint venture binding agreement duly signed by the CEO of both companies including evidence or plans of physical operational presence and set-up in Nigeria
- Furnish details of company ownership and share holding structure. With photocopies of its CAC Forms C02 and Co7.
- Provide evidence of what percentage of its key management positions are held by Nigerians and what percentage of the total work force are Nigerians. And also show overall percentage of work to be performed by Nigerian resources relative to total work volume.
- Provide a Nigerian Content Plan with detailed description of the role, work scope, man-hours and responsibilities of all the Nigerian companies and personnel that will be involved in executing the work .
- State proposed total scope of work to be conducted by Nigerian personnel (whether contracted directly or under subcontract agreements) with names and addresses including evidences of well equipped offices and workshop.
- Provide detailed plan for staff training and development on engineering, project management and procurement (including all software to be used, number of personnel, name of organization providing such training and evidence of past training record) for Nigerian personnel including description of any specific programs in place for transfer of technology and skills to indigenous businesses and Nigerians over the next five (5) years.
- Provide evidence of domiciliation of project management and procurement centers in Nigeria with physical addresses (not P.O. Box),
- Provide detailed description of the location of in-country facilities (Equipment, storage, workshops, repair, maintenance and testing facilities)
- Provide detailed statement with evidence of how it intends to maximize the use of Nigerian made goods and services.
- Provide details on any other Nigerian Content initiative the company is involved in.
- Provide MOA with Oil & Gas trainers association (OGTAN) registered facility for both class room type (theoretical) and on the-job training attachment for the duration of the project.
- Provide evidence of minimum 50% equity ownership of equipment by Nigerian subsidiary
5. Closing Date:
5. Closing Date:
Only tenderers who are registered with NJQS Product/Category Waste Management Services (3.15.07) as at 1200 Hours on 16th, August, 2011 being the advert closing date shall be invited to submit Technical Bids
Additional Information:
Please note that all interested Contractors are required to strictly adhere to following conditions in relation to their response to this Advert:
- As stated in item 3 hereto, Contractors are required to be pre-qualified in NJQS under this specific Services category to be eligible to participate in this tender opportunity.
- All costs incurred in preparing and processing NJQS pre-qualification and responding to this Tender Opportunity shall be to the Contractor’s own account.
- This Advert shall neither be construed as any form of commitment on the part of APD(N)L to award any contact to any Contractor and or associated contractors, sub-contractors or agents, nor shall it entitle pre-qualified Contractors to make any claims whatsoever, and/or seek any indemnity from APD(N)L and/or any of its partners by virtue of such Contractors having been pre-qualified in NJQS.
The tendering process shall be undertaken in accordance with the NNPC contract process which requires pre-qualified Contractors to submit their documentation in the following manner
(i) Pre-Qualified contractors in the relevant Product/Services category in NJQS will be requested to submit their Technical Tenders.
(ii) Following the Technical evaluation process, only technically accountant and financially qualified contractors will be requested to submit their Commercial Tenders,
APD(N)L will communicate only with authorised officers of the qualifying contractors at each stage of the Tender process, as necessary, and will NOT communicate through individuals or appointed Agents.
Please visit the NipeX portal at www.nipexng.com for this Advert and other relevant information.
