Star Deep Water Petroleum Limited
(A Chevron Company)
Operator of the Agbami Unit (OML 127/128)
Tender Opportunity Provision of Drill Stem Testing (DST) Surface Services to Support Deepwater Drilling and Completion Operations
Introduction:
Star Deep Water Petroleum Limited (SDWPL) invites interested and prequalified companies for this tender opportunity for the provision of Services listed under ‘Scope of Work/ Service Requirements’ which will be carried out in respect of its 2013 – 2016 Oil and Gas Wells Drilling, Completions and Workovers for Deepwater Operation in Nigeria. Availability to commence provision of Services is required for an anticipate cement Date: Fourth (4th) Quarter 2013. With a Primary Term of two (2) Years with a possible Optional Term of one (1) Year.
Scope of Work
Interested Applicants must be able to provide the following as required for Deepwater Drill Stem Testing Surface Services.
Contractor will be required to furnish well testing surface equipment (flow head, choke, manifold, heater, separator, burners etc). Contractor will be responsible for making all relevant calculations and submit detailed oil “well test report” including all electronic flow data and calculations. In addition, surface PVT will be required, oil and gas bottles to be supplied by Contractor.
Contractor will supply a Quality Plan outlining procedures to ensure that Company receives equipment that has been properly prepared for utilization. Dedicated QA personnel will be supplied by Contractor to ensure rigorous adherence to Contractor’s Quality Plan. Quality Plan will define shop equipment required to makeup and test completion equipment prior to shipment offshore.
Mandatory Tender Requirements
A. To be eligible for this tender exercise, interested bidders are required to be pre-qualified in the 3.04.30 (Drill Stem Testing Services) category in NipeX Joint Qualification System (NJQS) database. All successfully pre-qualified suppliers in this category by the bid close date will receive Invitation to Technical Tender (ITT).
B. Please note that interested bidders including their sub-contractor(s) shall be required to:
i. Meet all JQS mandatory requirements to be listed as “Prequalified” for a
category in the JQS database.
ii. Meet all Nigerian Content requirements stated in this advert in their responses to the invitation to Technical Tender.
C. To determine if you are pre-qualified and view the product/service category you are listed for: Open www.nipexng.com and access NJQS with your log in details, click on continue Joint Qualification Scheme tool, click check my supplier status and then click supplier product group.
D. If you are not listed in this product/service category, and you are registered with DPR to do business for this category, please contact NipeX office at 30, Oyinkan Abayomi drive, Ikoyi Lagos with your DP certificate as evidence for verification and necessary update.
E. To initiate and complete the JQS prequalification process, access www.nipexng.com to download the application form, make necessary payments and contact NipeX office for further action.
Nigerian Content
SDWPL is committed to the development of the Nigerian Oil and Gas business in observance with the Nigerian Oil and Gas Industry Content Development Act 2010 (NOGICD Act) enacted by the Federal Government of Nigeria in April 2010.
Pursuant to enactment of the NOGICD Act, the minimum Nigerian Content in any project service or product specification to be executed in the Nigerian Oil and Gas Industry shall be consistent with the level set in the schedule of the Act and any other target as may be directed by the Nigerian Content Development and Monitoring Board (NCDMB).
Contractors shall comply with the provisions of the NOGICD Act and all applicable regulations. Bidders that do not meet the Nigerian Content criterion will not be allowed to participate in next Tender Stage
The following are the Nigerian Content requirements bidders are expected to comply with in their technical bid submission.
A. Demonstrate that the entity is a Nigerian Registered Company, or a Nigerian Roistered Company in genuine alliance or joint venture with foreign company with details on scope and responsibilities of parties for this work. Such companies must show evidence of joint venture binding agreement duly signed by the CEO of both companies including evidence or plans of physical operational presence and set-up in Nigeria
B. Furnish details of company ownership and share holding structure. Also submit clear photocopies of your CAC Forms CO2 and CO7
C. Provide evidence of the percentage of 1) key management positions that are held by Nigerians and 2) total work force that are Nigerians. Also, show overall percentage of work to be performed by Nigerian resources relative to total work volume.
D. Provide a Nigerian Content Plan with a detailed description of the role, work scope, man-hours and responsibilities of all Nigerian companies and personnel that will be involved in executing the work. Also provide details of Nigerian Content contact or manager.
E. State proposed total scope of work to be performed by Nigerian personnel (whether contracted directly or under subcontract agreements) with names and addresses including evidences of well equipped offices and workshop; attach past experience of such patronage.
F. Specific to this project, provide detailed plan for staff training and development on engineering, project management and procurement (including all software to be used, number of personnel, name of organisation providing such training und evidence of past training record) for Nigerian personnel including description of any specific programs in place for transfer of technology and skills to indigenous businesses and Nigerians over the next five (5) years.
G. Provide evidence of domiciliation of project management and procurement centers in Nigeria with physical addresses (not P.O. Box).
H. Location of in-country facilities, (Equipment, storage, workshops, repair& maintenance facilities and, testing facilities).
I. Contractor must be willing and able to provide evidence of maximization of made in Nigeria goods and services.
J. Provide details on any other Nigerian Content initiative your company is involved in.
K. Provide evidence of MOU with OGTAN registered trainer to conduct classroom module of training and on the job attachment.
L. Provide human capacity building development plan including budget which must be minimum 10% of project man –hours or cost. Training will be targeted at developing capacity other than bidder’s personnel. Trainees will be nominated from a database maintained by NCDMB and the services of OGTAN registered trainers utilized to cover classroom modules.
M. Provide details of equipment ownership.
N. Bidders (Vendors, Original Equipment, Manufacturers-OEMs, and EPC Contractors) are required to present Nigerian Content Equipment Certificate (NCEC) issued by Nigerian Content Development and Monitoring Board (or evidence of application for the certificate) in respect of any components, spares, equipments, systems and packages to be used in the proposed project under tender
Close Date:
Only bidders who are registered with NJQS Product/Category 3.04.30 (Drill Stem Testing Services) by 4:00 pm. on 27th June, 2013 being the advert close date shall be invited to submit technical bid.
Please note the following:
1. Suppliers eligible for this tender opportunity are expected to be prequalified in NJQS under this product/service category.
2. The Invitation to Tender (ITT) and any further progression of this tender shall be via NipeX.
3. All costs incurred in preparing and processing NJQS prequalification shall be to the contractor’s accounts.
4. This advertisement shall neither be construed as any form of commitment on the part of SDWPL to award any contract to any company and or associated companies, sub-contractors or agents, nor shall it entitle prequalified companies to make any claims whatsoever, and/or seek any indemnity from SDWPL and or any of its partners by virtue of such companies having been prequalified in NJQS.
5. The tendering process shall he the NNPC contracting process requiring pre-qualified companies to submit technical tenders first. Following a technical review, only technically and financially qualified contractors will be requested to submit commercial tenders.
6. SDWPL will communicate only with authorized officers of the pre-qualifying companies and not through individuals or Agents.
Please visit NipeX portal al www.nipexng.com for this advert and other information.
Star Deep Water (a Chevron Corporation affiliate) is the operator of the Agbami Field. Other participants are Famfa Oil Limited, Nigeria National Petroleum Corporation (NNPC), Texaco Nigeria Outer Shelf Inc. (a Chevron Corporation affiliate)
Statoil Nigeria Limited and Petroleum Brasileiro Nigeria Limited
2 Chevron Drive, Lekki Peninsula, P.M.B, 12825, Lagos
