Star Deep Water Petroleum Limited
A Chevron Company
Operator of the Agbami Unit (OML 127/128)
Tender Opportunity
Provision of Fishing and Miscellaneous Tools Services (Deepwater) to Support Deepwater Drilling and Completion Operations
Introduction:
Star Deep Water Petroleum Limited (SDWPL) invites interested and qualified companies, in tendering tor provision of Services listed under ‘Scope of Work/Service Requirements’ which will he carried out in respect of Nigerian National Petroleum Corporation (NNPC) SDWPL 2013 – 2016 Oil and Gas Wells Drilling, Completions and Workovers for Deepwater Operations in Nigeria. Availability to commence provision of Services is required for an anticipated Commencement Dale: Third (3rd ) Quarter 2013. With a Primary Term of two (2) Years with a possible Optional Term of one (1) Year.
Scope of Work
DWD-2011-CW913176: Fishing Tools and Miscellaneous Services (Deepwater)
Interested Applicants must be able to provide the following as required for Deepwater Fishing Tools and Miscellaneous Services.
Miscellaneous Drilling Tool Rentals (inclusive, but not limited to: drilling jars, hole openers, roller-reamers, under-reamers, easing scrapers, bristle brushes, section mills, well head severing, string and near-bit stabilizers, cross-over subs, drill collars, pony drill collars and Non magnetic drill collars)
Miscellaneous Equipment Rentals (inclusive, but not limited to: tanks pumps lubricators and risers)
Fishing Tools for Cased and Open Hole Fishing Operations (including but not limited to: reverse circulating junk baskets, lead impression blocks, wash pipes, external and internal cutters, fishing jars and accelerators, bumpers jars, knuckle joints, ditch magnets, rotary mills, section mills, Bowen overshots, overshot extensions and guides, packer retrieving tools, grapples, casing, drill pipe and wireline spears, screw-in subs, box taps, taper taps and washover shoes.)
Fishing Tools Supervisor(s) with a minimum of (15) fifteen years relevant experience including a minimum of (5) years on semi-submersible rigs or drill ships.
Fishing Tools for 2-1/16″, 2-3/8″, 2-7/8″, 3-1/2″, 4-1/2″, 5-1/2″ and 7″ tubing; 3-1/2″, 4-1/2”, 5″, 5-1 /2″ and 6-5/8″ drill pipe; 4-3/4″ 5-1 /2″ 5-7/8″ 6-1 /2″. 8″ and 9″ drill collars; and 5″, 7″, 9-5/8″, 11-3/4″, 13-3/8″, 13-5/8″, 16″ and 20″ casing.
Base Facilities with full machine shop and welding capabilities to re-dress mills/shoes, stabilizers etc. as required.
Mandatory Requirements:
To be eligible for this tender exercise, interested Bidders are required to be pre-qualified in Category 10106-Fishiiig and Repair (Drilling Services) in Nipex Joint Qualification System (NJQS) database. All successfully pre-qualified Bidders in above categories shall receive Invitation to Technical Tender.
Note, interested Bidders including their sub-contractor (s) shall be required to:
Meet all JQS mandatory requirements to be listed as “PREQUALI Fl ED” for a Category in the NJQS database.
Meet all Nigerian Content requirements stated in this advert in their \ responses to the Invitation to Technical Tender.
(Failure to meet the Nigerian Content requirements is a “FATAL FLAW”.)
To determine if you are pre-qualified and view the Product/Service Category you are listed for Open www.nipexng.com and access NJQS with your log-in details, click on continue Joint Qualification Scheme tool, click check ‘My Supplier Status’ and then click ‘Supplier Product Group’.
If you are not listed in a Product/Service Category noted above, and you are-registered with DPR to do business for this Category, please contact Nipex office at 30 Oyinkan Abayomi drive, Ikoyi Lagos with your DPR Certificate for verification and necessary update.
To initiate and complete the JQS prequalification process, access www.nipexng.com to download the application form, make necessary payments and contact Nipex office for further action.
Nigerian Content Requirements
Demonstrate that the entity is a Nigerian Indigenous Company, or Nigerian Indigenous Company as the contracting entity in genuine alliance or joint venture with company with details on scope and responsibilities of parties for this work. Such companies must show evidence of joint venture binding agreement duly signed by the CEO of both companies including evidence or plans of physical operational presence and set-up in Nigeria.
Furnish details of company ownership and share holding structure: submit clear photocopies of your C’AC Forms C AC 2, C AC 7.
Provide evidence of what percentage of your key management positions is held by Nigerians and what percentage of the total work force are Nigerians; show overall percentage of work to be performed by Nigerian resources relative to total work volume.
Provide a Nigerian Content Plan providing a detailed description of the role, work scope, man-hours and responsibilities of all Nigerian companies and personnel that would be involved in executing the work; provide details of Nigerian Content focal point or manager.
State proposed total scope of work to be conducted by Nigerian personnel (whether contracted directly or under subcontract agreements) with names and addresses including evidences of well equipped offices and workshop; attach past experience of such patronage.
Specific to this project, provide detailed plan for staff training and development on engineering, project management and procurement (including all software to be used, number of personnel, name of organization providing such training and evidence of past training record) for Nigerian personnel including description of any specific programs in place for transfer of technology and skills to indigenous businesses and Nigerians over the next five (5) years.
Provide human capacity building development budget which must be minimum 10% of project man-hours or cost.
Provide evidence of domiciliation of project management and procurement centers in Nigeria with physical addresses (not P.O. Box).
Provide details of equipment ownership.
Location of in-country facilities (Equipment, storage, workshops, repair and maintenance facilities and, testing facilities.
Contractor must be willing and able to provide evidence of maximization of made in Nigeria goods and services.
Provide details on any other Nigerian Content initiative your company is involved in.
Close Date
Only tenderers who are registered with NJQS Product/Category -10106 – Fishing and Repair (Drilling) Services) by 4.00pm Thursday May 31st, 2012 being the closing date and shall be invited to submit technical bid.
Please note the following:
Suppliers eligible for this lender opportunity are expected to be prequalified in NJQS under this product/service category.
The Invitation to Tender (ITT) and any further progression of this tender shall be via NipeX.
Bidders who for the purpose of this bid process enters into a JV, partnership, consortium, etc with another bidder bidding on this project will be disqualified.
All costs incurred in preparing and processing NJQS prequalification shall be to the contractor’s accounts.
This advertisement shall neither be construed as any form of commitment on the part of Star Deep Water Petroleum Limited to award any contract to any company and or associated companies, sub-contractors or agents, nor shall it entitle prequalified companies to make any claims whatsoever, and/or seek any indemnity from SDWPL and or any of its partners by virtue of such companies having been prequalified in NJQS.
The tendering process shall be the NNPC contracting process requiring pre-qualified companies to submit technical tenders first. Following a technical review and evaluation, only technically and financially qualified contractors will be requested to submit commercial tenders.
SDWPL will communicate only with authorized officers of the pre-qualified companies and NOT through individuals or Agents.
Please visit the Nigerian Petroleum Exchange (Nipex) Public Opportunity Portal, www.nipexng.com for copy of this advertisement and any other required information.
Management
Chevron Nigeria Limited, 2 Chevron Drive, Lekki Peninsula, P.M.B 12825, Lagos.
