SPAN Ocean Oil Corporation
Operator of the NNPC/PAN Ocean Joint Venture
Tender Opportunity: Provision of Cement Pumping Unit and Casing/Liner Cementing and Engineering Services
1. Introduction
Pan Ocean Oil Corporation Nigeria, Operator of NNPC/Pan Ocean Joint Venture in OML-98, located onshore in Edo and Delta states, requires the services of competent and qualified contractor with suitable equipment and relevant experience for the provision of Cement Pumping Units and Cementing and Engineering Services.
Scope of work
Contractor shall have relevant cement slurries preparation equipment such as Cement Pumping Unit, Batch Cement Mixer, Bulk Cement Handling Equipment., etc capable of adequately cementing Casings/Liners sizes from 4.5″ to 20″.
Contractor shall have the capacity of ca.rryi.ng out various types of cement jobs, viz Primary/Secondary cementing. Squeeze Cementing, Top Jobs, Setting of Cement Plugs with slurry weights range of 10.5 – 17,2 ppg and Reservoir pressures from 3500psi – 6000 psi. Mud weight
ranges from 8.6 ppg to 14.2 ppg. Water Based and SOBM. Mud types.
Contractor shall also have facilities of Laboratory Testing of Cement Slurry and Water Sample and also capable of designing and developing cementing programme for all types of cement jobs.
Contractor shall in addition provide pumping facilities to perform primary, secondary and remedial cement jobs, carry out pressure testing of BOPs, choke manifold, kill lines, wellhead valves, Leak-off/integrity tests, casing/tubing tests and circulation during well control operation. Test pressure ranges from 1 000 – 6000 psi.
Contractor shall have adequate personnel with, adequate experience/capacity to handle the cementing and pumping equipments mentioned above and should be able to fix minor problems when they occur at all times.
2. Well Tracjectories
The wells in the OML 98 are mainly straight and deviated trajectories with deviation angles ranging from 0 -48 degrees 20″ Conductor Pilling at +/-250′ Refusal depth; 16″/13 3/8″ Surface hole size/casing sizes with setting depth at 5000 – 6000’, 12 ¼ Intermediate/Production hole size/9 5/8″ casing with setting depth. 9000′ – 10000′, 8 1/2 Production Hole/7″ Liner setting depths of 13000 -14500′, 6″ Production Hole/5″ or 4 ½ Liner with settings depths of 13,000 -14500′.
3. Mandatory Requirements
1. To be eligible for this tender exercise, interested bidders are required to be prequalified in the Cementing Equipment & Line Hanger systems 1.01.05 category in the NipeX Joint Qualification System (NJQS) database. All successfully pre-qualified suppliers in this NJQS category will receive Invitation to Technical Tender (ITT).
2. To determine if you are prequalified and view the product/service category you are listed for: visit www.nipexng.com and access NJQS with, your log-in details. click on continue Joint Qualification Scheme tool, click check my supplier status and then click supplier product group.
3. If you are not listed in this product category and you are registered with DPR to do business, contact NipeX office at 30 Oyinkan Abayomi Street, Ikoyi, and .Lagos with your DPR certificate as evidence for necessary update
4. To initiate the JQS pre-qualification process, access www.nipexng.com to down
load an application form, make necessary payments, and contact the NipeX office for further action.
5. To be eligible, all tenders must comply with the Nigerian Content requirements in the NipeX system
Nigerian Content Development Strategy
In consonance with Nigerian Oil & Gas Industry Content Development Act, Pan Ocean Corporation Nigeria is committed to providing opportunities for indigenous Nigerian capacity development and utilization in pursuant of the aforementioned, the prospective bidders must therefore, comply with the following criteria:
- Demonstrate that the entity is a wholly owned Nigerian company, or in genuine partnership with foreign companies, and that the company is not a commissioned agent
- Provide a verifiable local involvement plan through employment and sub-contracting plans for Nigerians.
- Submit an organizational structure to substantiate the information and address of location,
- Provide information of in-country facilities
- Explain further innovative proposals that would enhance and sustain Nigeria Content on this project.
- Provide what other information, innovative or plans you have that will increase Nigerian content development in the contract.
- The successful contractor will adjudged on its commitment to comply with the Nigerian Local Content requirements within optimal and practical use of Nigerian resources on the project.
- Demonstrate that all quantities of line-pipes would be procured from pipemill(s) in Nigeria as required under the Nigerian Oil & Gas Industry Content Development Act.
4. Close Date
This tender opportunity is open for 3 weeks (15) working days and shall close to interested bidders by 1200hrs on Tuesday, 26th July, 2011.
Only Tenderers who are registered with NJQS Product/Category as at 26th July, 2011 being the advert close date shall be invited to submit Technical Bids.
5. Additional Information
A. Interested contractors must be prequalified for this product/service category in
NJQS
B. Full tendering procedure will be provided only to contractors that have been successfully prequalified in NJQS
C. This advertisement shall neither be construed as an Invitation to Tender (ITT) nor a commitment on the part of Pan Ocean to award a contract to any supplier and/or associated companies, sub-contractors or agents
D. This advertisement shall riot entitle prequalified companies to make any claims whatsoever and/or seek (my indemnity from Pan Ocean and/or its partners by virtue of such having been pre-qualified in NJQS E.
E. All costs incurred in registering and prequalifying for this and other product/service categories in NJQS shall become solely by suppliers
F. Pan Ocean shall communicate only with the authorized/responsible personnel of
companies and not through unauthorized individuals or agents.
Note: Please visit the NipeX Portal at www.nipexng.com for this advert and other information.
